• Conquest Silver - Premium Lead-Free Solder
• Conquest - Lead-Free for Radiator Repair
• AquaClean - Silver-bearing Lead-free Solder
• Lead Free Jewelry Alloys
• Lead Free, Antimony Free Pewter

Conquest Silver is a lead-free solder that doesn't act like one. Working with this alloy is like working with 50/50! The excellent flow, high tensile strength, and high fatigue resistance has made Conquest Silver the proven lead-free alternative.

Benefits:

• Excellent Wiping Properties
• Below EPA limit for lead
• High tensile strength
• High fatigue resistance
• Flows like 50/50
• Works on larger fittings
• Better Corrosion Resistance

Properties:

• Tensile Stength: 6400 psi
• Melt Temperature: 430 F
• Pasty Range: 220 F

Also see WaterFlow Flux

Back to Top

Entered into the Genman DIN 1707 specification in 1981, this alloy has a proven ten year track record in Europe. Compatible with all tin/lead solders and copper radiator alloys, our lead free solder produces a higher melting point connection than the original tin/lead. This new joint takes more heat than the factory original joint before a leak can occur. It does not form low melting alloys that could cause joint failure at lower temperatures.

Benefits

• Lead-Free
• Proven track record
• Repairs are sronger than original joint
• Higher melting point than original joint
• Compatible with all lead solders
• Compatible with all copper-based radiator alloys
• Antimony free

Physical Data

Chemical Analysis	Conquest	40/60
Tin (Sn) %	97	40
Copper (Cu) %	3	-
Lead (Pd) %	0.10 max *	60
Property	Conquest	40/60
Solidus	441 F	361 F
Liquidus	590 F	453 F
Density	0.265 lb/in3	0.335 lbs/in3
Ft. of wire per lb (0.125 dia.)	25.6	20.28

Back to Top

AquaClean is our fastest-flowing Lead-Free. It contains silver - not in the name, but in the product, where you'll see the results. There is no other alloy like AquaClean because of it's patented formulation. It is made up of a proprietary combination of Tin, Bismuth, Silver, and Copper. metallurgically, AquaClean has the strongest physical properties of any lead-free!

Properties:

• Melting Temperature: 403 F
• Density: 0.261 lbs/in3
• Tensile Strength: 9,500 psi

Benefits:

• Excellent wiping properties
• Highest tensile strength available
• Fastest flowing lead-free
• Proprietary, patented alloy
• Lowest melting point lead-free, 403 F
• Antimony free
• Compatible with all copper/brass alloys

Back to Top

Conquest Industries currently offers six alternatives to lead-based jewelry alloys:

• Tin/Antimony
  Certain Tin/Antimony alloys are very adaptable to the jewelry casting process. Antimony expands when it solidifies and can offset some of the shrinkage problems.
• Pewters
• AquaClean
• FryLo Alloys
• Tin/Silver Alloys
• Pure Tin

Contact / Conquest Representatives for technical and ordering information.

Back to Top

Back to Top

Back to Top